Set Of 2 130794 Spindle Assembies With Mounting Bolts & 173436 Pulley & Hardware
$57.00
Description
Set Of 2 Complete spindle assembies (also called Mandrel) for AYP, replaces part number 128285, 130794, 133172, 137641, 137645, 532128285, 532130794, 532133172, 532137645, 690-130-00012. Includes pulley, 129861 153537, 153535, 173436 Mounting holes tapped, mounting screws included. 80-11-742-CO
Also includes pulley locknut, 187690 Spacer, Washer (same as 129963), blade bolt with washer
The bottom of the spindle has a 5 point star for Craftsman Poulan Husqvarna blades with 5 point star mounting holes
- Mounting holes are tapped for easier installation and 3 mounting bolts are included. This is an improvement over the FSP and some other spindles being sold. Many (including the FSP spindle) have mounting holes that are not tapped and require a self tapping bolt making installation much more difficult
- AYP (maker of Craftsman, Poulan, Husqvarna, YardPro, WeedEater, Wizard & more) used this spindle on 38 and 42 inch decks, 1993 to 2007. They began to use a different 4 mounting bolt version in 2006 (some models)
- This is a complete assembly including 137646 shaft, upper and lower bearings, 128774 housing, top spindle nut, spacer (washer like item below pulley), blade bolt with washers, and three mounting bolts. Also includes pulley
- Warning: Important note when installing, be sure to put the spacer (thick washer part number 187690) under the pulley (between the pulley and top bearing). Failure to install with the spacer or installing the spacer in the wrong position (on top of the pulley) will result in pulley and shaft failure in a short amount of time
20 in stock