Murray Lawn Tractor Parts
Home

Murray Lawn Tractor Parts

1001200 Murray Jackshaft, Mandrel, Spindle: Replacement Assembly, Has Grease Zerk.

1001200 Murray Jackshaft, Mandrel, Spindle: Replacement Assembly, Has Grease Zerk.
View larger imageEmail a friend

1001200 Murray Jackshaft, Mandrel, Spindle: Replacement Assembly, Has Grease Zerk.

SKU: 

10189 AMC

In Stock
Availability: Usually ships in 1-2 business days
List Price: $39.99
Our Price: $22.06
You Save: $17.93 (45%)
Description:

Will Replace Murray part #1001200, 1001200MA (and MTD 1001046). Sometimes called a "Jackshaft" or Spindle Assembly or Mandrel. Has a grease zerk, greasing means longer bearing life. This part is used on newer, 2001 and up, Murray Lawn Tractors.

Features:
  • Includes Shaft, upper and lower bearings, lower dust cover.

  • High Quality.

  • Used on 2001 and newer Murray and Scotts Lawn Tractors.

  • Will Replace Murray part #1001200, 1001200MA

Product Details:
Product Length: 8.25 inches
Product Width: 6.5 inches
Product Height: 6.5 inches
Product Weight: 3.05 pounds
Package Length: 8.3 inches
Package Width: 6.5 inches
Package Height: 6.3 inches
Package Weight: 3.1 pounds
Average Customer Rating: based on 37 reviews
Customer Reviews:
Average Customer Review:4.5 ( 37 customer reviews )
Write an online review and share your thoughts with other customers.

Most Helpful Customer Reviews

3 of 3 found the following review helpful:

5Grease Fitting Placement  May 03, 2013
By William Bennett
1001200 Jackshaft Assembly for Lawn Mowers ,(by Rotary) - has a working grease zerk fitting, properly installed. The grease fitting is in place (under the deck), and the passage hole allowing the grease to pass through the alunimum housing to lubricate the bearings - HAS BEEN DRILLED - (OPEN). (By Rotary) - Best
-------------------------------------------
1001200MA Jackshaft Assembly for Lawn Mowers (by Murray) - has a dummy grease zerk fitting, for cosmetics only. The grease fitting is in place (under the deck), but the passage hole allowing the grease to pass through the alunimum housing to lubricate the bearings - HAS BEEN DRILLED - (OPEN). (By Murray)
-------------------------------------------
NOTE: The grease cannot lubricate the bearings, because the ball bearings are sealed, so I removed the inner seals from the bearings using a small screwdriver to pry with, before I installed the 1001200 jackshaft housings. Using the zerk fittings, grease can then flow into the bearings, but not past the outer bearing seals - which I left in place.
-------------------------------------------
NOTE: Two of Murray 690411MA Blade Adapter is also required for Murray Riding Mowers below 2002 year models.
-------------------------------------------

2 of 2 found the following review helpful:

5Zerk is worthless, but fine none the less  May 23, 2013
By Andrew Hills "Helllloooooooo"
Please closely review the zerk fitting, this product has a zerk fitting but the bearings are sealed, so it does no good. The previous reviewer that mentioned the zerk vs non zerk has the right idea but since both are sealed bearing the zerk fitting has no function, on either.

Just buy what ever is cheaper.

On another note this product seems to be a fine replacement for my original murray mandrel or quill or jack shaft, what ever you want to call it.

Hope you found this review helpful

2 of 2 found the following review helpful:

5Murray Jackshaft assy. for 46" mowing deck  Sep 01, 2010
By Too The Point
Received jackshaft assy. in a very short time. It installed and worked like a charm. I added plenty of grease after installation and had no problems with assy. when mowing. Very happy with price, service, and quality.

1 of 1 found the following review helpful:

4Four Stars  Jul 08, 2014
By M. Andrews "Mark"
Exact replacement for my 12 year-old Murray riding mower.

1 of 1 found the following review helpful:

1terrible customer service  Jun 05, 2014
By frankdawg
it was not the right part and when I tried to contact them they did not answer I tried multiple times within 2 weeks and nobody got back in touch with me so I was out $30 for nothing

See all 37 customer reviews on Amazon.com
Web business powered by Amazon WebStore